These photos show the 90º angle bracket with the “NMO” style mount, pictured here with a ¼ wave VHF antenna. The CB antenna is larger, but you can see how the angle bracket looks mounted on the driver's fender. These brackets are made of stainless steel and are available in either a polished or black finish.

This shot from the front shows how low the bracket fits on the fender. Note how close the coax connection is to the fender, yet it does not make contact with the paint

This view from the rear of the antenna shows how the coax is fed through the gap between the fender and the hood.

Here is a cellular antenna mounted on the right fender ahead of the AM/FM antenna.

This one shows how the bracket is mounted on the inner surface of the fender.